-
PRODUCT CENTER
Vibrating Feeder
During the production flow, vibrating feeder can feed massive and granulate materials to the material receiving device in an even, regular and continuous way, and it can continuously and evenly feed the crushing equipment in the stone and sand production line.Introduction Of Vibrating Feeder
In the production process, vibrating feeder (,mineral feeding machine、vibratory feeder) is able to evenly, quantitatively and continuously feed the bulk and granular materials from the storage bin to the material receiving device. In the sand and stone production line, vibratory feeder can continuously and evenly feed materials into the crusher equipment and coarsely screen the materials, so that it is widely used in the crushing and screening combination plant in ore beneficiation, building material, silicate and chemical industry.
Features Of Vibratory Feeder
Vibratory feeder has simple structure, feeding evenly, continuous performance and adjustable exciting force.
Discharging quantity of china vibrating feeder can be changed and controlled anytime and it’s easy to operate.
The eccentric block of vibratory feeder is the exciting source which features little noise, low power consumption, good adjustment and no material clashing phenomenon.
1. The exciting force can be changed and adjusted easily and reliably at any time; the vibrating motor is the exciting source which features little noise, low power consumption, good adjustment and no material clashing phenomenon.
2. Simple structure, reliable operation, easy installation and arrangement, light weight, small size and easy to maintain.
Principle Of China Vibrating Feeder
According to the performance requirement of the equipment, when configuring and designing it, try to reduce the pressure of the materials on the chute. According to the requirement of the manufacturing company, the effective discharging mouth of the storage cabin should not be bigger than one four of the width of the chute and the flowing speed of the materials should be control in the range of 6-18m/min. As for the materials with big feeding amount, an ore blocking board with sufficient height should be installed at the discharging mouth of the storage bin. To not influence the performance of the feed grizzly, the ore blocking board should not be fixed onto the chute. To facilitate the smooth discharging of the materials, the dip angle of the back wall of the storage bin is better designed in the range of 55-65°.
Technical Data of Vibrating Feeder
| Model | Max. Feeding Size (mm) | Processing Capacity (t/h) | Motor Power (kw) | Obliquity of material trough (°) | Trough size (mm) |
| GZD-650×2300 | 300 | 80-100 | 2×1.1 | 10-20 | 650×2300 |
| GZD-750×2500 | 350 | 100-130 | 2×1.1 | 10-20 | 750×2500 |
| GZD-850×3000 | 400 | 120-150 | 2×3 | 10-20 | 850×3000 |
| GZD-1000×3600 | 500 | 150-200 | 2×3.7 | 10-20 | 1000×3600 |
| GZD-1100×3600 | 580 | 240-300 | 2×3.7 | 10-20 | 1100×3600 |
| GZD-1300×3600 | 650 | 450-600 | 2×5.5 | 10-20 | 1300×3600 |
| GZD-1500×3600 | 1050 | 450-1000 | 2×7.5 | 10-20 | 1500×3600 |
| ZSW-380×95 | 500 | 100-280 | 8p 11 | 0-5-10-15 | 3800×960 |
| ZSW-490×110 | 630 | 150-400 | 6p 15 | 0-5-10 | 4900×1100 |
| ZSW-490×130 | 750 | 400-700 | 6p 22 | 0-5-10 | 4900×1300 |
| ZSW-600×130 | 750 | 400-700 | 4p 22 | 0-5-10 | 6000×1300 |
| ZSW-600×150 | 800 | 500-900 | 4p 30 | 0-5-10 | 6000×1500 |
| ZSW-600×180 | 900 | 700-1300 | 4p 37 | 0-5-10 | 6000×1800 |
| ZSW-600×200 | 1200 | 800-1500 | 4p 55 | 0-5-10 | 6000×2000 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
